BURNERWORLD: The Forum

Ok guys starting a thread to record sizes for all the bits and pieces (Bolts, Bearings, Seatclamps etc) that are easily obtainable on the net !
Feel free to add anything you feel would be helpful to the newbie just starting out on their burner adventure
First few added


Bolts For SR Stems - Allen Cap Bolts M8 x 25mm

Mk1&2 Headset Bearings - 1" (MAKE SURE YOU SPECIFY FOR BMX AS OLD ROADBIKE HEADSETS ARE ALSO 1" THREAD BUT WITH A DIFFERENT CUP SIZE)

1 Piece Crank Pedal Size - 1/2"
3 Piece Crank Pedal Size - 9/16"
Bottom Bracket - 24tpi

Mk1 Seatpost diameter 28.6mm.........Clamp 31.8
Mk2 Seatpost diameter 22.2mm.........Clamp 25.4

Front Tyre 20 x 2.125"
Back Tyre 20 x 1.75" (Exc Aero Pro & Team AP Both 1.75")

Chain Size 1/2" x 1/8"

Aero pro front fleckie CAT EYE RR-390

Aero pro front fleckie bracket CAT EYE B-10

Aero pro rear fleckie CAT EYE RR-390zw

Aero pro rear fleckie bracket CAT EYE B-1
(Please note the rear brackets come in different degree's and a few different instances have proved to be correct spec)

Should be on page 1 bump

Anybody know the nut / bolt size for a standard MK2 seat post clamp ?

What's the mk2 fork steer tube length, and thread length please?

Hi, could anyone tell me what size Sugino cranks are there and what would my Night Burner have had originally?
Thank you.